Vim documentation: usr_23

main help file
*usr_23.txt*	For Vim version 7.2.  Last change: 2006 Apr 24

		     VIM USER MANUAL - by Bram Moolenaar

			     Editing other files

This chapter is about editing files that are not ordinary files.  With Vim you
can edit files that are compressed or encrypted.  Some files need to be
accessed over the internet.  With some restrictions, binary files can be
edited as well.

|23.1|	DOS, Mac and Unix files
|23.2|	Files on the internet
|23.3|	Encryption
|23.4|	Binary files
|23.5|	Compressed files

     Next chapter: |usr_24.txt|  Inserting quickly
 Previous chapter: |usr_22.txt|  Finding the file to edit
Table of contents: |usr_toc.txt|

*23.1* DOS, Mac and Unix files Back in the early days, the old Teletype machines used two characters to start a new line. One to move the carriage back to the first position (carriage return, <CR>), another to move the paper up (line feed, <LF>). When computers came out, storage was expensive. Some people decided that they did not need two characters for end-of-line. The UNIX people decided they could use <Line Feed> only for end-of-line. The Apple people standardized on <CR>. The MS-DOS (and Microsoft Windows) folks decided to keep the old <CR><LF>. This means that if you try to move a file from one system to another, you have line-break problems. The Vim editor automatically recognizes the different file formats and handles things properly behind your back. The option 'fileformats' contains the various formats that will be tried when a new file is edited. The following command, for example, tells Vim to try UNIX format first and MS-DOS format second: :set fileformats=unix,dos You will notice the format in the message you get when editing a file. You don't see anything if you edit a native file format. Thus editing a Unix file on Unix won't result in a remark. But when you edit a dos file, Vim will notify you of this: "/tmp/test" [dos] 3L, 71C For a Mac file you would see "[mac]". The detected file format is stored in the 'fileformat' option. To see which format you have, execute the following command: :set fileformat? The three names that Vim uses are: unix <LF> dos <CR><LF> mac <CR> USING THE MAC FORMAT On Unix, <LF> is used to break a line. It's not unusual to have a <CR> character halfway a line. Incidentally, this happens quite often in Vi (and Vim) scripts. On the Macintosh, where <CR> is the line break character, it's possible to have a <LF> character halfway a line. The result is that it's not possible to be 100% sure whether a file containing both <CR> and <LF> characters is a Mac or a Unix file. Therefore, Vim assumes that on Unix you probably won't edit a Mac file, and doesn't check for this type of file. To check for this format anyway, add "mac" to 'fileformats': :set fileformats+=mac Then Vim will take a guess at the file format. Watch out for situations where Vim guesses wrong. OVERRULING THE FORMAT If you use the good old Vi and try to edit an MS-DOS format file, you will find that each line ends with a ^M character. (^M is <CR>). The automatic detection avoids this. Suppose you do want to edit the file that way? Then you need to overrule the format: :edit ++ff=unix file.txt The "++" string is an item that tells Vim that an option name follows, which overrules the default for this single command. "++ff" is used for 'fileformat'. You could also use "++ff=mac" or "++ff=dos". This doesn't work for any option, only "++ff" and "++enc" are currently implemented. The full names "++fileformat" and "++encoding" also work. CONVERSION You can use the 'fileformat' option to convert from one file format to another. Suppose, for example, that you have an MS-DOS file named README.TXT that you want to convert to UNIX format. Start by editing the MS-DOS format file: vim README.TXT Vim will recognize this as a dos format file. Now change the file format to UNIX: :set fileformat=unix :write The file is written in Unix format.
*23.2* Files on the internet Someone sends you an e-mail message, which refers to a file by its URL. For example: You can find the information here: You could start a program to download the file, save it on your local disk and then start Vim to edit it. There is a much simpler way. Move the cursor to any character of the URL. Then use this command: gf With a bit of luck, Vim will figure out which program to use for downloading the file, download it and edit the copy. To open the file in a new window use CTRL-W f. If something goes wrong you will get an error message. It's possible that the URL is wrong, you don't have permission to read it, the network connection is down, etc. Unfortunately, it's hard to tell the cause of the error. You might want to try the manual way of downloading the file. Accessing files over the internet works with the netrw plugin. Currently URLs with these formats are recognized: ftp:// uses ftp rcp:// uses rcp scp:// uses scp http:// uses wget reading only Vim doesn't do the communication itself, it relies on the mentioned programs to be available on your computer. On most Unix systems "ftp" and "rcp" will be present. "scp" and "wget" might need to be installed. Vim detects these URLs for each command that starts editing a new file, also with ":edit" and ":split", for example. Write commands also work, except for http://. For more information, also about passwords, see |netrw|.
*23.3* Encryption Some information you prefer to keep to yourself. For example, when writing a test on a computer that students also use. You don't want clever students to figure out a way to read the questions before the exam starts. Vim can encrypt the file for you, which gives you some protection. To start editing a new file with encryption, use the "-x" argument to start Vim. Example: vim -x exam.txt Vim prompts you for a key used for encrypting and decrypting the file: Enter encryption key: Carefully type the secret key now. You cannot see the characters you type, they will be replaced by stars. To avoid the situation that a typing mistake will cause trouble, Vim asks you to enter the key again: Enter same key again: You can now edit this file normally and put in all your secrets. When you finish editing the file and tell Vim to exit, the file is encrypted and written. When you edit the file with Vim, it will ask you to enter the same key again. You don't need to use the "-x" argument. You can also use the normal ":edit" command. Vim adds a magic string to the file by which it recognizes that the file was encrypted. If you try to view this file using another program, all you get is garbage. Also, if you edit the file with Vim and enter the wrong key, you get garbage. Vim does not have a mechanism to check if the key is the right one (this makes it much harder to break the key). SWITCHING ENCRYPTION ON AND OFF To disable the encryption of a file, set the 'key' option to an empty string: :set key= The next time you write the file this will be done without encryption. Setting the 'key' option to enable encryption is not a good idea, because the password appears in the clear. Anyone shoulder-surfing can read your password. To avoid this problem, the ":X" command was created. It asks you for an encryption key, just like the "-x" argument did: :X Enter encryption key: ****** Enter same key again: ****** LIMITS ON ENCRYPTION The encryption algorithm used by Vim is weak. It is good enough to keep out the casual prowler, but not good enough to keep out a cryptology expert with lots of time on his hands. Also you should be aware that the swap file is not encrypted; so while you are editing, people with superuser privileges can read the unencrypted text from this file. One way to avoid letting people read your swap file is to avoid using one. If the -n argument is supplied on the command line, no swap file is used (instead, Vim puts everything in memory). For example, to edit the encrypted file "file.txt" without a swap file use the following command: vim -x -n file.txt When already editing a file, the swapfile can be disabled with: :setlocal noswapfile Since there is no swapfile, recovery will be impossible. Save the file a bit more often to avoid the risk of losing your changes. While the file is in memory, it is in plain text. Anyone with privilege can look in the editor's memory and discover the contents of the file. If you use a viminfo file, be aware that the contents of text registers are written out in the clear as well. If you really want to secure the contents of a file, edit it only on a portable computer not connected to a network, use good encryption tools, and keep the computer locked up in a big safe when not in use.
*23.4* Binary files You can edit binary files with Vim. Vim wasn't really made for this, thus there are a few restrictions. But you can read a file, change a character and write it back, with the result that only that one character was changed and the file is identical otherwise. To make sure that Vim does not use its clever tricks in the wrong way, add the "-b" argument when starting Vim: vim -b datafile This sets the 'binary' option. The effect of this is that unexpected side effects are turned off. For example, 'textwidth' is set to zero, to avoid automatic formatting of lines. And files are always read in Unix file format. Binary mode can be used to change a message in a program. Be careful not to insert or delete any characters, it would stop the program from working. Use "R" to enter replace mode. Many characters in the file will be unprintable. To see them in Hex format: :set display=uhex Otherwise, the "ga" command can be used to see the value of the character under the cursor. The output, when the cursor is on an <Esc>, looks like this: <^[> 27, Hex 1b, Octal 033 There might not be many line breaks in the file. To get some overview switch the 'wrap' option off: :set nowrap BYTE POSITION To see on which byte you are in the file use this command: g CTRL-G The output is verbose: Col 9-16 of 9-16; Line 277 of 330; Word 1806 of 2058; Byte 10580 of 12206 The last two numbers are the byte position in the file and the total number of bytes. This takes into account how 'fileformat' changes the number of bytes that a line break uses. To move to a specific byte in the file, use the "go" command. For example, to move to byte 2345: 2345go USING XXD A real binary editor shows the text in two ways: as it is and in hex format. You can do this in Vim by first converting the file with the "xxd" program. This comes with Vim. First edit the file in binary mode: vim -b datafile Now convert the file to a hex dump with xxd: :%!xxd The text will look like this: 0000000: 1f8b 0808 39d7 173b 0203 7474 002b 4e49 ....9..; 0000010: 4b2c 8660 eb9c ecac c462 eb94 345e 2e30 K,.`.....b..4^.0 0000020: 373b 2731 0b22 0ca6 c1a2 d669 1035 39d9 7;'1.".....i.59. You can now view and edit the text as you like. Vim treats the information as ordinary text. Changing the hex does not cause the printable character to be changed, or the other way around. Finally convert it back with: :%!xxd -r Only changes in the hex part are used. Changes in the printable text part on the right are ignored. See the manual page of xxd for more information.
*23.5* Compressed files This is easy: You can edit a compressed file just like any other file. The "gzip" plugin takes care of decompressing the file when you edit it. And compressing it again when you write it. These compression methods are currently supported: .Z compress .gz gzip .bz2 bzip2 Vim uses the mentioned programs to do the actual compression and decompression. You might need to install the programs first.
Next chapter: |usr_24.txt| Inserting quickly Copyright: see |manual-copyright| vim:tw=78:ts=8:ft=help:norl: top - main help file